|
|
PLEASE PRINT THIS PAGE
Please print this page. It contains step-by-step instructions on downloading, installing and registering your Panicware Pop-Up Stopper® provided by PSC.
1. Click the following link to go to the Pop-up Stopper® download page (Fig. 1):
http://channels.newstreets.net/Products/Panicware
2. Click the Download button for your web browser version (Internet Explorer 5.x-6.x or Netscape 4.x or higher)
Fig. 1
| 3. When you see the File Download window (Fig. 2), click OPEN (Windows XP) or select RUN and click OK (Windows 98/Me). This will start the download process. |
 Fig. 2 |
| 4. When the file has finished downloading, Pop-Up Stopper® will begin installing (Fig. 3). Click NEXT to continue. |
 Fig. 3 |
| 5. Read the End-User License Agreement (Fig. 4), then click NEXT to continue. |
 Fig. 4 |
| 6. Do not change the default install location (Fig. 5). Click NEXT to continue. |
 Fig. 5 |
| 7. Click NEXT to continue. (Fig. 6) |
 Fig. 6 |
| 8. Click NEXT to install Pop-up Stopper®. (Fig. 7) |
 Fig. 7 |
| 9. Click FINISH to finish installation. (Fig. 8) |
 Fig. 8 |
| 10. On the Pop-up Stopper® Setup Wizard (Fig. 9), click NEXT to continue. |
 Fig. 9 |
| 11. To receive the Activation Code that allows your Pop-up Stopper® to work, enter your e-mail address (Fig. 10), then click NEXT to continue. (Note: You will need to be connected to the Internet for this) |
 Fig. 10 |
| 12. Leave the Pop-up Stopper Setup Wizard open. Open your e-mail program and check for new messages. You should see one from Panicware Registration. Open the message and find the Registration Code (Fig. 11). Copy this code or print out the e-mail message. | |
 Fig. 11 |
| 13. Go back to the Pop-Up Stopper® Setup Wizard and enter the registration code in the windows as shown in Fig. 12. Click NEXT to continue. |
 Fig. 12 |
|
14. Click FINISH to complete Pop-Up Stopper® Setup. (Fig. 13) The links in Fig. 13 connect directly to the Panicware website. We recommend you contact PSC for support. |
 Fig. 13 |